WiNG Controller v7.9.5.1 NOVA Getting Started Guide

Select Profiles > Profile Name > Interface > Virtual > Routing.

Configure the following OSFP settings:


Priority	Select Priority to set the OSPF priority used to select the network designated route. Use the spinner control to set the value from 0 to 255
Cost	Assign cost to set the cost of the OSPF interface. Use the spinner control to set the value from 1 to 65,535
Bandwidth	Set the OSPF bandwidth from 1 to 10,000,000 Kbps
Authentication Type	Use the drop-down list box to select the authentication type used to validate credentials within the OSPF dynamic route The available options are None, null, simple-password, and message-digest. The default value is None

Select Add at the bottom of the MD5 Authentication table to add the Key ID and Password used for an MD5 validation of authenticator credentials


Key ID	Set the unique OSPF message digest authentication key ID from 1 to 255
Password	Type the OSFP password The password value is displayed either as asterisks or in plain text (select to view text)

Select Save to update routing changes.

VLAN Routing Configuration